詳情介紹

耐磨陶瓷滾筒的性能優點：
 
與傳統的包膠滾筒相比，其優勢在于：
1.  耐磨性能優異，使用壽命長
        經中南大學粉末冶金研究所測定，特種陶瓷的耐磨性相當于錳鋼的266倍，高鉻鑄鐵的171.5倍。根據的現場運行經驗，皮帶機陶瓷滾筒、輸送帶陶瓷滾筒耐用時間至少5年以上，減少維修頻次和費用。
        實踐證明，陶瓷滾筒使用壽命是傳統包膠滾筒的10倍以上。
2.  摩擦阻力大，不打滑
        傳統橡膠防磨層經過一段時間磨損后，表面變得光滑，易造成皮帶打滑跑偏。陶瓷片表面有凸點，粗糙度高，陶瓷與皮帶相互接觸之間摩擦系數大，所以連續作業不易打滑及跑邊。
3.  陶瓷粘接牢固
        在施工過程中，用高強度陶瓷金屬粘合劑將襯板粘到金屬筒體后，相互擠緊，使之沒有間隙；同時陶瓷與滾筒接觸面有獨特的"燕尾槽"設計，陶瓷與滾筒間粘膠厚度確保1mm以上，粘接剪切強度確保12Mpa以上，確保不發生陶瓷片脫落現象。
4.  安裝簡便
       施工工藝成熟、簡便、周期短。在鋼結構做好后，一個安裝工人1天內一般可完成一臺陶瓷滾筒包膠的安裝，不耽誤客戶生產，方便用戶及時投入生產。
5.  每列陶瓷間的溝槽，便于排水排泥
        陶瓷滾筒有我公司獨特的排水溝結構設計，可以把雨水和散落的粉料盡快從水溝上排除掉。
 
英文：
The surface of the ceramic roller of the belt conveyor is a bumped corundum ceramic anti-wear layer to increase the surface friction, and then bonded with the high-strength ceramic metal adhesive for the roller. The normal service life is more than 10 times that of the rubber-coated roller.
Performance advantages of wear-resistant ceramic drums:
?
Compared with traditional rubberized rollers, the advantages are:
1. Excellent wear resistance and long service life
According to the Institute of Powder Metallurgy, Central South University, the wear resistance of special ceramics is equivalent to 266 times that of manganese steel and 171.5 times that of high chromium cast iron. According to the field operation experience, the belt ceramic roller and the belt ceramic roller have a durability of at least 5 years, reducing the frequency and cost of maintenance.
Practice has proved that the service life of ceramic drum is more than 10 times that of traditional rubberized roller.
2. High frictional resistance, no slip
After a period of wear and tear on the traditional rubber wear layer, the surface becomes smooth, which tends to cause the belt to slip and run off. The surface of the ceramic sheet has bumps and high roughness. The friction coefficient between the ceramic and the belt is large, so continuous operation is not easy to slip and run.
3. Ceramic bonding is firm
During the construction process, the liner is adhered to the metal cylinder with high-strength ceramic metal adhesive, and then squeezed tightly to make it have no gap; at the same time, the ceramic and roller contact surface has a unique "dovetail groove" design, ceramic and roller The thickness of the adhesive is ensured to be more than 1 mm, and the bonding shear strength is ensured to be 12 Mpa or more to ensure that the ceramic sheet does not fall off.
4. Easy to install
The construction process is mature, simple, and short in cycle. After the steel structure is completed, an installation worker can generally complete the installation of a ceramic drum rubber in one day, without delaying the customer's production, and facilitating the user to put into production in time.
5. The groove between each column of ceramics is convenient for draining mud
The ceramic drum has our unique drainage structure design, which can remove rainwater and scattered powder from the ditch as soon as possible.