詳情介紹

原裝白光938焊臺HAKKO938ESD智能無鉛焊臺T10-D24
深圳市佶之達科技特價供應HAKKO938ESD，售完即止。
HAKKO938電焊臺具有如下特點：
    90 W 功率: 大小焊點或無鉛焊接, 均能應付自如.
    插片式溫度控制: 防止隨意改動焊接溫度
    溫度補正功能: 當焊咀實際溫度與設定溫度有誤差時,只需輸入補正值, 焊臺即會補正焊咀溫度.
    27 V 低壓輸出: 能保護敏感組件
    省電功能: 兩種模式, 可設定15分鐘待機, 溫度自動降低到200度,或設定30分鐘待機, 發熱組件的電源自動關閉.
    數碼操作: 數碼式調溫及溫度顯示
    復合式焊咀設計: 升溫快速, 容易更換
    防靜電: 拆消靜電設
    
    
     Applicable from a microsoldering to a heavy soldering
    
     Lead-free soldering compliant
    
     Card lock for reliable temperature control
    
     Easy temperature offset by the digital function.
    
     Error outputs on the display with buzzer beep tones
    
     ESD-safe
    
    
    Top of page
    
    
    
    Part No. Packing List
    No. 938 HAKKO 938 Soldering Station, HAKKO 917 (Soldering Iron w/ Tip Shape 2.4D), Power Cord, Iron Holder (w/ Cleaning Sponge), Card, Joint Band, Heat Resistant Pad, Instruction Manual
    
    
    
    
    Power Consumption 100W
    Temperature Range 200-450°C/ (400-840°F)
    
    Soldering Station
    Output 27V 3.4A
    Outer Dimensions 100(W) x 106(H) x 188(D)mm
    Weight 2.5kg
    
    HAKKO 917 (Soldering Iron)
    Power Consumption 90W (27V)
    Standard Tip T10-D24 (Shape 2.4D)
    Tip to Ground Resistance < 2Ω
    Leak Voltage < 2mV
    Cord 1.2m
    Total Length (w/o Cord) 175mm (when the Shape 2.4D tip is attached)
    Weight (w/o Cord) 45g (when the Shape 2.4D tip is attached)
    * The temperature above is measured with HAKKO 191.
    * This product is ESD-protected.